DeWalt DCK755P3T 18v XR Cordless 7 Piece Power Tool Kit Inc 3x 5.0Ah Batteries, 1x Charger, 3x TSTAK Cases & 1x TSTAK 2.0 Trolley
This DeWalt DCK755P3T is a combo kit consisting of 7 of DeWalt’s most popular 18v tools, as well as 3x 5.0Ah batteries, a DCG115 charger, 3x TSTAK carry cases to store your tools and a TSTAK 2.0 trolley for easy transportation too. All seven tools have brushless motors, for excellent power and efficiency.
CONTENTS
-
DCD796 Combi Drill
- DCF887 Impact Driver
- DCS355 Multi-Tool
- DCG405 Angle Grinder
- DCS570 Circular Saw
- DCH273 SDS+ Rotary Hammer Drill
- DCS334 Jigsaw
- 3 x 5.0Ah DCB184 Li-Ion Batteries
- DCB115 Multi Voltage Charger
- 3x TSTAK Cases
- 1x TSTAK 2.0 Carrier Trolley
DCD796 COMBI DRILL
FEATURES
- Intelligent trigger design allows for total control of application
- Improved ergonomic design with rubber grip over mould improving users comfort
- Two speed all metal transmission for increased runtime and longer tool life
- Ultra compact, lightweight design allows use in confined spaces
- 15 position adjustable torque control for consistent screw driving into a variety of materials
- Drill Driver and Hammer feature for multiply applications
- Steel belt hook and magnetic bit holder ensures strong storage solutions
- Electric brake and variable speed trigger
SPECIFICATION
- Power Output (W): 460
- Max Torque (Soft / Hard): 27 / 70 Nm
- Torque Settings: 15 + Drill
- Variable Speed Control Trigger: Yes
- No Load Speed (Low / High): 0-550 / 0-2000 rpm
- Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
- Chuck Capacity (mm): 1.5-13.0
- Drill Capacity: Concrete & Metal (mm): 13
- Drill Capacity: Wood (mm): 40
- Impact Rate (Low / High): 0-9350 / 0-34000 bpm
- Overall Length: 190mm
- Net Weight With 3/4/5Ah Batt: 1.8 kg
DCF887 IMPACT DRIVER
FEATURES
- High power brushless motor outputting up to 205Nm of torque ensures heavy applications are completed quickly
- Application control is achieved through 3 motor speeds and torque settings including ‘PrecisionDrive’
- ‘PrecisionDrive’ mode offers additional control in screwdriving applications to avoid material and fastener damage
- Super lightweight and compact the tool is very comfortable to use and fits in small spaces
- Electric brake and triple LED job light
SPECIFICATION
- Max Torque: 205 Nm
- Battery Capacity Indicator: No
- Battery Compatibility: 18v Lithium-Ion (XR)
- No Load Speed: 0-3250 rpm
- Standard Bolt Capacity: M4-M12
- Max. Impacts Per Min: 0-3800 ipm
- Driving Shank: 1/4″ Hex
- Overall Length: 134 mm
- Net Weight With 3/4/5Ah Batt: 1.5 kg
DCS355 MULTI-TOOL
FEATURES
- Compact 300w motor delivers 0-20,000 oscillations per minute, providing faster completion of the most demanding tasks
- Variable speed control and dual grip position allows for a simple soft start function, and better application control
- Rubber over mould and ergonomic handle design enable comfortable use over extended periods
- A bright LED Light illuminates dark work surfaces for accurate cutting
- Unique quick change accessory system – tool free & single handed operation
SPECIFICATION
- Power Output: 300 W
- Voltage: 18v
- No Loads Speed: 0-20,000 opm
- Length: 310mm
- Oscillating Angle: 1.6°
- Variable Speed: Yes
- LED Light: Yes
- Weight: 1.7 kg
DCG405 ANGLE GRINDER
FEATURES
- Capable of x69 cuts in 1/2″ steel rebar when used with 5.0Ah battery
- Compact gear case for increased access to tight spaces and gives excellent cutting depth
- Slide switch provides less user fatigue
- Built in no-volt release gives protection against accidental start ups when new battery is installed
- Electronic brake has braking time of <2 seconds when the trigger is released to help reduce accidental contact and injury
- Constant Clutch and E-Clutch protects from kickbacks, cuts and wheel bursts
- Mesh Covers restricts dust being sucked through the motor
- Ergonomic slim body with rubber over-mould for improved comfort and control
- Two Position Side Handle offers greater comfort and control
- 1 or 2 touch guard for quick and easy keyless adjustment
SPECIFICATION
- Voltage: 18v XR
- Power Input: 1000 Watts
- Power Output: 800 Watt
- No Load Speed: 9000 rpm
- Max. Disc Diameter: 125 mm
- Bore Diameter:
- Spindle Thread: M14
- Weight: 1.75 kg
- Length: 310 mm
DCS570 CIRCULAR SAW
FEATURES
- Includes DT1951 construction blade 184mm x 16mm 24T for fast and smooth cutting
- 64mm Depth of cut ideal for thicker materials
- Over-mould touchpoints on the handle for improved grip and ergonomics
- Cut away guard lifts when in use for increased visibility
- LED light and dust blower for increased visibility
- Durable aluminium cut away guard increases cut-line visibility
- Aluminium base is lightweight and durable
- Air lock compatible dust extraction system for a cleaner and safer jobsite environment
SPECIFICATION
- Voltage: 18v XR
- No Load Speed: 5500 rpm
- Blade Diameter: 184 mm
- Blade Bore: 16 mm
- Bevel Capacity: 57 °
- Max. Depth of Cut at 90º: 64 mm
DCH273 SDS+ ROTARY HAMMER DRILL
FEATURES
- Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
- Electronic clutch for consistently-high torque and improved durability
- Perform & Protect: best-in-class vibration at 6.6m/s², minimising user fatigue
- Bright white LED with delay feature improves visibility
SPECIFICATION
- Voltage: 18v
- Chuck Type: SDS+ Plus
- Drilling Modes: Rotary, Rotary Hammer & Chiselling
- Speed Control: Variable Speed
- Impact Energy: 2.1j
- Blows Per Minute: 4500
- Max Bit Capacity in Wood: 26 mm
- Max Bit Capacity in Metal: 13 mm
- Max Bit Capacity in Concrete: 20 mm
- No Load Speed: 1200 rpm
- Weight: 2.9kg
DCS334 JIGSAW
FEATURES
- Variable speed control – easy to reach thumb wheel
- Tool free blade release
- Dust blower keeps the cut line visible
- 4 stage orbital action
- Airlock compatible
- Improved clamp design for more security more accuracy
- Increased visibility with twin LED’s
- D-Handle
SPECIFICATION
- Voltage: 18v
- Max Cutting Capacity (Wood): 135 mm
- Max Cutting Capacity (Aluminium): 25 mm
- Stroke Length: 26 mm
- No Load Speed: 3200 spm
- Bevel Capacity: 47 degrees
- Weight: 2.1 kg
Reviews
There are no reviews yet.